| PERFORMANCE
CHARACTERISTICS |
| Standard
Ranges (Inches W.C.) |
| Unidirectional
Ranges: |
| Differential
or Gage |
| 0/0.1 |
0/2.0 |
0/10 |
0/50 |
| 0/0.25 |
0/2.5 |
0/15 |
0/100 |
| 0/0.50 |
0/3.0 |
0/20 |
0/150 |
| 0/1.0 |
0/5.0 |
0/25 |
0/200 |
| Bidirectional
Ranges: |
| Compound |
| 0/0.5 |
0/2.5 |
0/20.0 |
|
| 0/0.25 |
0/5.0 |
0/25.0 |
|
| 0/0.50 |
0/10.0 |
0/50.0 |
|
| 0/1.0 |
0/15.0 |
0/100.0 |
|
| Scaling
in other engineering units (eg. kPa, cmH2O)and
special range calibration available - consult factory |
| Accuracy
Class (F.S.): |
0.5% |
0.25% |
| Nonlinearity |
|
|
| Terminal
Point* |
±0.4 |
±0.2 |
| Best
fit straight line(BFSL) |
±0.3 |
±0.15 |
| Hysteresis |
±0.02 |
±0.02 |
| Nonrepeatability |
±0.05 |
±0.03 |
| Interchangability |
±0.5% |
±0.250% |
| *
Including hysteresis |
| Stability: |
±0.5%F.S./yr |
| ENVIRONMENTAL
CHARACTERISTICS |
| Temperature
Limits: |
| Storage: |
-40
to +210°F |
| Operating: |
-20
to +185°F |
| Compensated
Range: |
0
to +160°F |
| Thermal
Coefficients: |
| |
0.5% |
0.25% |
| ZERO |
±0.02%F.S./°F |
±0.01%F.S./°F |
| SPAN |
±0.02%F.S./°F |
±0.01%F.S./°F |
|
|
| FUNCTIONAL
CHARACTERISTICS |
| Overpressure
Limits (F.S.): |
| Proof |
15
psid |
| Burst |
50
psid |
| Maximum
static pressure |
100
psig |
| Static
pressure effect |
less
than 0.5% |
| Vibration
Sweep: |
| Less
than 0.2% F.S./g temporary effect 10-130 Hz |
| Mounting
Position Effect: |
| 0.5"W.C.
and higher |
=<0.1%F.S. |
| Below
0.5"W.C. |
=<0.25F.S. |
| ELECTRICAL
SPECIFICATIONS |
| Output
Signal Options: |
| Current:
4-20mA two wire current loop |
| Voltage:
All voltage outputs are 3 wire |
| 0-5
Vdc 1-6 Vdc ±5.0 Vdc |
|
1-5 Vdc ±2.5
Vdc |
| Response
Time: |
| Standard:
250msec |
| Otional |
slow: |
1
second |
consult
factory |
| |
fast: |
5
ms |
| Warm-up
time: |
| Full
specification: Less than one second |
| Resolution: |
| Infinite |
| Power
Supply Range: |
| 12-36
Vdc range without effect on output signal |
| Reverse
Polarity Protected |
| Internal
Zero and Span: |
| ±10%
F.S. adjustment |
| Supply
Current: |
| 2.6mA
typical vor voltage output |
|
|
| PHYSICAL
CHARACTERISTICS |
| Enclosure: |
| 4NEMA
4X, 300 series stainless steel |
| Process
Connections: |
| two
1/4 NPT female |
| Electrical
Connections: |
| Two
1/2" female electrical conduit connections isolated from
the electronics. Seperate access cover for terminal connections. |
| Media: |
Clean,
dry and noncorrosive gas (consult factory for use on other
media)
NOT FOR USE ON LIQUIDS
|
| HAZARDOUS
LOCATION CERTIFICATION |
| FM
approval is optional |
Factory
Mutual approvals intrisically safe for use in:
Class I,Div 1, Groups A, B, C, D
Class II,Div 1, Groups E, F, G
Class III,Div 1, when wired in accordance with
dresser drawings 71B241 (1-3) |
| Consult
factory on other pressure range, temperature copensation,
packaging variations or response time available |
|
