TOLL FREE APPLICATON ASSISTANCE

• 4½" and 6" dial sizes
  
• Aluminum cases
  
• Bronze bourdon tube and brass socket
  
• Ranges through 1000psi
  
• Micrometer adjustable pointer
  
• Available with electric contacts
  

The Ashcroft^® differential pressure gauge is an economical way to display the difference of two seperate inputs on one dial indicator. The case stye is similar to other Ashcroft gauges, making panel gauge consistency possible. While this product is supplied only with a bronze bourdon tube, capillary with diaphragm seals may be used where corrosion is a concern.

• 316 stainless steel or Monel wetted parts
  
• 4½" or 6" dial sizes
  
• Ranges from 10 psi-1000 psi
  
• Static pressures from 45 psi-1200 psi depending on the range of the gauge
  
• Pointer indicator with zero at seven or twelve o’clock position
  
• Built-in back case flange for easy wall mounting

Differential pressure gauges are often used when filters are required in the process. Differential pressure is measured upstream and downstream of the filter. When the process is corrosive to gauges with bronze/brass wetted parts, the only alternative was to isolate the gauge from the process with capillary and isolators or diaphragm seals. Now, when the process is compatible with 316 stainless steel or Monel, Dresser Instrument offers the new Ashcroft Types 1127 or 1128 differential pressure gauges with 4.5" or 6" dial sizes.

• Piston Actuator
• Stainless steel case
• Ranges from 5 psid-150 psid
• Static pressures up to 6000 psi
• Aluminum (5), brass or stainless steel bodies (1)
• Buna-N O-rings (others available)
• Superior magnets for smoother pointer motion
• Standard or explosion-proof reed switches available
• 5-year warranty

The Type 1130 uses a piston design where small migration of the process media is permissible.(2) It is recommended for high differential and high static pressures, up to 6000 psi. Body materials are available in Aluminum, Brass, and Stainless Steel, with Buna, Viton, or EPDM seals.(3)

(1), (2) Not for use with incompatible media.
(3) Other wetted parts include stainless steel, Teflon and ceramic.
(4) Not to be used with water or corrosive applications.
(5) Static pressure over 3000 psi in SS only.

• Rolling diaphragm actuator
• Stainless steel case
• Ranges from 5 psid-150 psid
• Static pressures up to 3000 psi
• Aluminum (3), brass or stainless steel bodies (1)
• Buna-N O-rings (others available)
• Superior magnets for smoother pointer motion
• Standard or explosion-proof reed switches available
• 5-year warranty

The Type 1131 is utilized for applications where migration of the process media is not permissible. The Type 1131 uses a rolling diaphragm design to separate the high and low-pressure ports to isolate the media and can see up to 3000 psi static pressures. Body materials are available in Aluminum, Brass, and Stainless Steel, with Buna, Viton, or EPDM seals.(2)

(1) Not for use with incompatable media.
(2) Other wetted parts include stainless steel, Teflon and ceramic.
(3) Not to be used with water or corrosive applications.

• Small convoluted diaphragm actuator
• Stainless steel case
• Ranges from 1 psid-60 psid
• Static pressures up to 1500 psi
• Aluminum (3), brass or stainless steel bodies (1)
• Buna-N O-rings (others available)
• Superior magnets for smoother pointer motion
• Standard or explosion-proof reed switches available
• 5-year warranty

The Type 1132 uses a convoluted diaphragm design with no migration of the process media. It is recommended for lower differential and high static pressures, up to 1500 psi. Body materials are available in Aluminum, Brass, and Stainless Steel, with Buna, Viton, or EPDM seals.(2)

1) Not for use with incompatible media.
(2) Other wetted parts include stainless steel, Teflon and ceramic.
(3) Not to be used with water or corrosive applications.

• Large convoluted diaphragm actuator
• Stainless steel case
• Ranges from 2 IWD-200 IWD
• Static pressures up to 500 psi
• Aluminum body (1)(3)
• Buna-N O-rings (others available)
• Superior magnets for smoother pointer motion
• Standard switches available
• 5-year warranty

The Type 1133 uses a convoluted diaphragm to sense low inches of water differentials while ensuring no migration of the process media. Maximum static pressures for ranges of 5 IWD and below is 45 psi and 500 psi for all other ranges. Body materials are only available in Aluminum, with Buna, Viton, or EPDM seals.(2)

(1) Not for use with incompatible media.
(2) Other wetted parts include stainless steel, Teflon and ceramic.
(3) Not to be used with water or corrosive applications.

• Stainless steel case
  
• 316 stainless steel wetted parts
  
• 580 psi static pressure standard with optional static pressure to 3625 psi
  
• External zero adjust
  
• Optional liquid-filled case
  
• 4" (100mm) or 6" (160mm) dial sizes

The Ashcroft^® Type 5503 differential pressure gauge is available with ranges from 30 IWD to 300 psi with optional static pressure to 3625 psi. Optional wetted parts includes Hastelloy C & Monel. Typical applications include use with liquified gas for nitrogen, helium, argon and carbon dioxide.

• Stainless steel case
  
• 316 stainless steel wetted parts
  
• Inches of water differential ranges with 145 psi static pressure
  
• External zero adjust
  
• Available with open or solid front case styles
  
• Optional liquid-filled case
• 4" (100mm) or 6" (160mm) dial sizes

The Ashcroft^® Type 5509 differential pressure gauge is available with 316 SS wetted parts. This rugged gauge features an external zero adjust standard.