Specifications
Solenoid Enclosures: Valves listed in this series have either
Red-Hat metal solenoid enclosures or Red-Hat II molded epoxy
solenoids. Red-Hat II valves are identified by the change letter
"G" in their catalog numbers, e.g., 8030G13, and are
shown in red.
Standard Enclosures:
Red-Hat -- Type 1 General Purpose
Red-Hat II -- Types 1, 2, 3, 3S, 4 and 4X Combination General Purpose
and Watertight
Optional Enclosures:
Red-Hat -- Types 3, 7 and 9 Combination Explosionproof and Raintight.
To order, add prefix "EF" to catalog number.
Red-Hat II -- Types 3, 3S, 4, 4X, 6, 6P, 7 and 9 Combination
Explosionproof and Watertight. To order, add prefix "EF" to
catalog number.
Additional constructions are available. The Optional
Features Section contains descriptions and ordering information
for: Open Frame Solenoids · Junction Box Enclosures · Panel Mount
Constructions.
|
Application
| Conditions: |
Pressure |
| Low
Vacuum |
| Low
(and Rough) |
760 to 25 Torr
(or 29"HG) |
| Medium
(and Fine) |
25 to 10-3
Torr |
| High
Vacuum |
| High |
10-3
to 10-6 Torr |
| Very
High |
10-6
to 10-9 Torr |
| Ultra
High |
10-9
Torr and below |
Electrical: Standard Voltages: 24,
120, 240, 480 volts, AC, 60 Hz (or 110, 220 volts, AC, 50 Hz)
DC available.
Coil: Continuous duty molded Class F.
Nominal Ambient Temperature Ranges: 32°F to 125°F.
|
Valve Parts in Contact with Fluids:
Body -- Brass or Aluminum, as listed
Seals and Discs -- Buna "N" (low and medium vacuum), FPM or
degassed Buna "N" (high vacuum)
Core Tube -- 305 s.s.
Core and Plugnut -- 430F s.s.
Springs -- 302 s.s.
Shading Coil -- Copper
Disc Holder -- Nylon (Normally Open ³/8" to ¾"
NPT valves only)
Core Guide -- Acetal
Rider Ring -- Filled PTFE
Installation: Mountable in any position, except as noted.
Approvals: CSA certified.
Ordering Information: Important: We must have catalog
number, voltage and Hertz, operating pressure and fluid handled. Use
strainers with Solenoid Valves. |
