General
Description
These general purpose valves have a NAMUR pad mount interface for
mounting direct to the actuator. They have unique seal technology
which uses a combination of hard T-seals and flexible O-rings to
provide buble tight shutoff, resistance to dirt, and a multi-million
cycle life. These valves conform to international standards and are
for use with air and inert gas.
Specifications
Solenoid Enclosures: Red-Hat II -- Types 1, 2, 3, 3S, 4 and 4X
Combination General Purpose and Watertight
Optional Enclosures:
Red-Hat II -- Types 3, 3S, 4, 4X, 6, 6P, 7 and 9 Combination
Explosionproof and Watertight. To order, add prefix "EF" to
catalog number.
|
Molded Epoxy coil per 3 x DIN 46244. To order, specify prefix
"SC". (No 6 volt DC available.)
Media:
Air and inert Gas
Electrical:
Standard Voltages: 24, 120, 240, 480 volts, AC, 60 Hz (15-230 volts,
AC, 50 Hz)
6, 12, 24, 120, 240 volts, DC
Coil: Continuous duty molded Class F. Class H also available.
Nominal Ambient Temperature Ranges: AC Construction: -4°F to
125°F.
DC Construction: -4°F to 104°F.
|
Valve Parts in Contact with Fluids:
Body -- Hard anodized aluminum or 316 s.s.
Seals and Discs -- NBR and PUR Core Tube -- 305 s.s.
Core and Plugnut -- 430F s.s.
Springs -- 302 s.s.
Shading Coil -- Copper (Aluminum body); Silver (316 s.s. body)
End Covers -- Glass Filled Polyamide (Aluminum body); 316 s.s. (316
s.s. body)
Spool -- Stainless steel
Internal Parts -- Zamak, Steal, Acetal
Approvals: UL listed General Purpose valves; CSA certified.
Installation: Mountable in any position. Ordering
Information: Important: We must have catalog number,
voltage and Hertz.
|
