Specifications
Solenoid Enclosures: Valves listed in this series have Red-Hat II
molded epoxy solenoids. Red-Hat II valves are identified by the change
letter "G" in their catalog numbers, e.g., 8342G1, and
are shown in red.
Standard Enclosures:
Types 1, 2, 3, 3S, 4 and 4X Combination General Purpose and Watertight
Optional Enclosures:
Types 3, 3S, 4, 4X, 6, 6P, 7 and 9 Combination Explosionproof and
Watertight. To order, add prefix "EF" to catalog number.
Additional constructions are available. The Optional
Features Section contains descriptions and ordering information for:
Open Frame Solenoids · Junction Box Enclosures · Panel Mount
Constructions.
|
Dual Solenoid Operation:
Solenoid may be energized momentarily (¹/10 second) or
energized continuously.
Caution: Do not energize both solenoids simultaneously.
Electrical: Standard Voltages: 24, 120, 240, 480 volts, AC, 60 Hz
(or 110, 220 volts, AC, 50 Hz)
Other voltages are available when required.
Coil: Continuous duty molded Class F.
Nominal Ambient Temperature Ranges: 32°F to 125°F.
|
Valve Parts in Contact with Fluids:
Body -- Brass or 304 s.s., as listed
Seals and Disc -- Buna "N" and Viton*
Core Tube -- 305 s.s.
Core and Plugnut -- 430F s.s.
Springs -- 302 s.s.
Shading Coil -- Copper
Sleeve -- Nylon
Seats -- Rulon**
Optional: Adjustable flow controls regulate speed of the cylinder
pistons in either direction. Flow adjustment of both Cylinder A and B
ports is independantly controlled.
Approvals: CSA certified. UL listed as a General Purpose Valve.
Ordering Information: Important: We must have catalog
number, voltage and Hertz, operating pressure and fluid handled. Use
strainers with Solenoid Valves.
* DuPont Co. trademark
** Dixon Industries Co. trademark |
