Specifications
Solenoid Enclosures: Valves listed in this series have Red-Hat II
molded epoxy solenoids, are identified by the change letter
"G" in their catalog numbers, e.g., 8316G54, and are
shown in red.
Standard Enclosures:
Red-Hat II -- Types 1, 2, 3, 3S, 4 and 4X Combination General Purpose
and Watertight.
Optional Enclosures:
Red-Hat II -- Types 3, 3S, 4, 4X, 6, 6P, 7 and 9 Combination
Explosionproof and Watertight. To order, add prefix "EF" to
catalog number.
Additional constructions are available. The Optional
Features Section contains descriptions and ordering information for:
Open Frame Solenoids · Junction Box Enclosures · Panel Mount
Constructions.
|
Electrical: Standard Voltages: 24, 120, 240, 480 volts, AC, 60 Hz
(or 110, 220 volts, AC, 50 Hz)
6, 12, 24, 120, 240 volts, DC
Other voltages are available when required.
Note: 125 and 250 volts, DC, are battery voltages applied in
power plants. Special AC and DC constructions are available to pilot
power plant control valves.
Coil: Continuous duty molded Class F.
Nominal Ambient Temperature Ranges: AC Construction: 32°F to 125°F.
DC Construction: 32°F to 104°F
|
Valve Parts in Contact with Fluids:
Body -- Brass
Seals and Discs -- Buna "N"
Diaphragm Assembly -- Buna "N" with Brass and Stainless Steel
trim
Core Tube -- 305 s.s.
Core and Plugnut -- 430F s.s.
Core Springs -- 302 s.s., 17-7PH s.s.
Shading Coil -- Copper
Pilot Seat Cartridge and Disc Holder -- Acetal
Approvals: CSA certified.
Ordering Information: Important: We must have catalog
number, voltage and Hertz, operating pressure and fluid handled. Use
strainers with Solenoid Valves.
| IMPORTANT: A minimum
operating pressure differential must be maintained between the
pressure and exhaust ports. Supply and exhaust piping must be
full area, unrestricted. ASCO flow controls and other similar
components must be installed in the cylinder lines only. |
|
