Specifications
Solenoid Enclosures: Valves listed in this series have Red-Hat II
molded epoxy solenoids and are identified by the change letter
"G" in their catalog numbers, e.g., 8223G21, and are
shown in red.
Standard Enclosures:
Red-Hat II -- Types 1, 2, 3, 3S, 4 and 4X Combination General Purpose
and Watertight
Optional Enclosures:
Red-Hat II -- Types 3, 3S, 4, 4X, 6, 6P, 7 and 9 Combination
Explosionproof and Watertight. To order, add prefix "EF" to
catalog number.
Additional constructions are available. The Optional
Features Section contains descriptions and ordering information for:
Open Frame Solenoids · Junction Box Enclosures · Panel Mount
Constructions.
|
Electrical: Standard Voltages: 24, 120, 240, 480 volts, AC, 60 Hz
(or 110, 220 volts, AC, 50 Hz)
6, 12, 24, 120, 240 volts, DC
Other voltages are available when required.
Coil: Continuous duty molded Class F.
Nominal Ambient Temperature Ranges: AC Construction: 32°F to 125°F.
DC Construction: 32°F to 104°F.
|
Valve Parts in Contact with Fluids:
Body -- Brass or Series 300 s.s., as listed
Seals and Discs -- Teflon and Buna "N" (also Nylon on brass
valves)
Core Tube -- 305 s.s.
Springs -- 302 s.s.
Shading Coil -- Copper (brass body) or Silver (stainless steel body)
Approvals: CSA certified. Meets applicable CE directives.
Ordering Information: Important: We must have catalog
number, voltage and Hertz, operating pressure and fluid handled. Use
strainers with Solenoid Valves. |
